Repository files navigation
Polymorph usb soundcard (USB <--> [I2S/DSP/LJF/RJF]) based on "SDR Widget"
project
On board is already codec which can sniff I2S/DSP/RJF/LJF bus
(RX or TX data)
For normal operation no extra drivers needed. Using standard drivers
included in nearly all operating systems
Development is also possible at Windows and Linux
Updating FW is possible directly through USB interface (drivers are part of
programmer SW). No external tool needed.
CPU: AVR32 UC3A3256
As clock source generator is used CS2200
On board is DAC TLV320AIC33
Supported sampling frequencies: 8000, 11025, 16000, 22050, 24000, 32000,
44100 and 48000 Hz
Supported digital audio interfaces: I2S, DSP, Left justified,
Right justified
Bit precision: up to 24 bit
Control thru USB HID (HW bridge uniprot)
Device is highly configurable (master/slave, BCLK oversampling, MCLK
oversampling, MCLK offset, word offset, word precision...)
Debug messages can be sent through UART interface (115200-8-N-1). This pin
is wired out to 2.54 pin header -> easy to connect
About
Polymorph usb soundcard (USB <--> [I2S/DSP/LJF/RJF]) based on "SDR Widget" project
Resources
Stars
Watchers
Forks
You can’t perform that action at this time.