Skip to content

Actions: Duet3D/RepRapFirmware

Actions

All workflows

Actions

Loading...
Loading

Showing runs from all workflows
164 workflow runs
164 workflow runs

Filter by Event

Filter by Status

Filter by Branch

Filter by Actor

Add heater watchdog to the expansion board Auto-close blank templates #400: Issue #1212 opened by T3P3
10s
10s
Release 3.6.2 Upload release assets #28: Release 3.6.2 published by dc42
1m 1s
1m 1s
Release 3.6.2 Upload prerelease assets #15: Release 3.6.2 published by dc42
1s
1s
Blocking commands prevent Estop on USB channel Auto-close blank templates #399: Issue #1211 opened by AndyEveritt
9s
9s
Add option to specify an ambient temperature sensor to be used with a heater Auto-close blank templates #398: Issue #1210 opened by dc42
9s
9s
Release 3.6.2-rc.1 Upload release assets #27: Release 3.6.2-rc.1 published by dc42
1s
1s
Release 3.6.2-rc.1 Upload prerelease assets #14: Release 3.6.2-rc.1 published by dc42
30s
30s
Upgrade FreeRTOS from version 11.0.1 to 11.2.0 Auto-close blank templates #397: Issue #1209 opened by dc42
12s
12s
When using a mixing extruder, OM field move.extruders[n].rawPosition is only updated for the first extruder Auto-close blank templates #396: Issue #1208 opened by dc42
8s
8s
The ability to block of gcode instead of having to comment every line Auto-close blank templates #395: Issue #1206 opened by mark4017
8s
8s
[FeatureRequest]: Support for BiPolar (like a LP player) kinematics Auto-close blank templates #394: Issue #1205 opened by Kenzu
8m 6s
8m 6s
Defer G10 command until input shaping for previous move has completed Auto-close blank templates #393: Issue #1204 opened by dc42
8s
8s
CAN clock task not reliably woken up in the presence of CAN errors Auto-close blank templates #392: Issue #1203 opened by dc42
8s
8s
Heat Task Stuck errors in RRF 3.6.2-beta.1 Auto-close blank templates #391: Issue #1202 opened by dc42
8s
8s
Create shared MODBUS system. Auto-close blank templates #390: Issue #1201 opened by T3P3
10s
10s
Watchdog timeouts in 3.6.2-beta.1 Auto-close blank templates #389: Issue #1200 opened by dc42
9s
9s
Ternary operator evaluation sometimes fails Auto-close blank templates #388: Issue #1199 opened by dc42
6s
6s
Thumbnail offsets not returned correctly when CRLF line endings are used Auto-close blank templates #387: Issue #1198 opened by dc42
9s
9s
[FeatureRequest]: Allow waiting for chamber temperature below 40° C Auto-close blank templates #386: Issue #1197 opened by Kubunter
8s
8s
[FeatureRequest]: parity bit for RS485 Modbus Auto-close blank templates #385: Issue #1196 opened by maukcc
10s
10s
[FeatureRequest]: Save steps/mm (M92) in config-override.g through M500 Auto-close blank templates #384: Issue #1195 opened by brunnerant
11s
11s
Release 3.6.2 beta 1 Upload prerelease assets #13: Release 3.6.2-beta.1 published by dc42
32s
32s
Release 3.6.2 beta 1 Upload release assets #26: Release 3.6.2-beta.1 published by dc42
1s
1s
Different object cancellation behaviour when segmentation is used Auto-close blank templates #383: Issue #1194 opened by dc42
9s
9s
[FeatureRequest]: Add state.processing to the object model Auto-close blank templates #382: Issue #1193 opened by jaysuk
8s
8s