3.5.2 Fix incorrect HA Entity Ids

🐛Bugfix : Incorrect Home Assistant Entity Id for new setup

What's Changed

• Updated the pPubSubClient lib version
• Fix incorrect default_entity_id in Home Assistant autodiscover

Full Changelog: 3.5.1...3.5.2

3.5.1 Set Time button + FAN3/4 fix

🕰️Add Set Time button and improved compatibility with Home Assistant
✨Fix FAN3/4 doesn't appear in Home Assistant
Minor bugfixes

What's Changed

• Use newest Palazzetti lib version (minor bugfixes)
• Update WBase to 2.5.4 (Improve getLastestUpdateInfo)
• Update ArduinoJson Lib to latest version
• Add "Set Time" button to Home Assistant autodiscover
• Update schematic and pcb to KiCAD 9
• 📌Switch to PubSubClient3 lib which is maintained and Increase MQTT buffer size
• Add "default_entity_id" for Home Assistant 2025.10
• Update Base to 2.5.5 (fix Wifi reconnection delay for ESP32, thx @MaxensF)
• Fix FAN3 & FAN4 not showing up in Home Assistant by @strnk in #79 (thx!)

New Contributors

• @strnk made their first contribution in #79

Full Changelog: 3.5.0...3.5.1

3.5.0 Climate limit + Fix blank update version + New HW version

🌡️Climate max set point adjusted to be centered around 19°C for air stove
Fix empty update reported
New Hardware Version (V2.0)

What's Changed

• Climate max set point adjusted to be centered around 19°C for air stove
• Fix empty update reported
• New Hardware Version (V2.0) by @Domochip in #65

Full Changelog: 3.4.0...3.5.0

What release file should I use

For module in version 3.1.x and lower: use WirelessPalaControl.x.bin file
For the others, you can use both files or go to the firmware page for Online Update ;-)

3.4.0 Climate Thermostat + More Entities (some are optional)

✨Adding climate type Thermostat
➕Adding Service Time Counter
➕Adding optional Flue Gas Temperature, Feeder, Differential Pressure and Target DP sensors
(You'll need to go to the device to enable them if needed)

What's Changed

• Add climate by @Domochip in #62
• Factorize code using 2 helper functions
• Add T3 entity
• Use Stove limits in setPoint slider now
• Add Service Time Counter entity
• Adding Feeder entity
• Add differential pressure and dp target entities
• Update Base to 2.5.1: hostname is MODEL at first start
• Adjust climate max temperature to center range around 19°C for air type setPoint (Who wants its room at 51°C...)

Full Changelog: 3.3.0...3.4.0

What release file should I use

For module in version 3.1.x and lower: use WirelessPalaControl.x.bin file
For the others, you can use both files or go to the firmware page for Online Update ;-)

3.3.0 HAss Firmware update progress + Hydro sensors + Captive portal

Home Assistant will now display firmware update progress
Sensor logic improved for Hydro stoves
Captive portal simplify first experience when connected to the module AP

What's Changed

• 3.2.x documentation by @Domochip in #56
• Use Palazzetti lib v2.7.6: Domochip/Palazzetti#3 by @Flobul
• Add new Home Assistant Palazzetti integration in README: https://www.home-assistant.io/integrations/palazzetti/
• Hass 2024.11 firmware update progress by @Domochip in #57
• Improve Home Assistant temperature entities for Hydro stove by @tanc in #59
• Update Base to 2.50: Captive portal in AP

New Contributors

• @tanc made their first contribution in #59

Full Changelog: 3.2.2...3.3.0

What release file should I use

For module in version 3.1.x and lower: use WirelessPalaControl.x.bin file
For the others, you can use both files or go to the firmware page for Online Update ;-)

3.2.2 Online Update + Home Assistant Update entity

🛜New default Wifi AP info: WPalaControl/password
🎉Online Update
🎉Home Asssistant Update

What's Changed

• Publish module infos to MQTT baseTopic
• WBase memory consumption optimizations
• Rename project: WirelessPalaControl -> WPalaControl
• Remove Discover web page and associated endpoints
• Add Online Update: module can auto-update from Github releases
• Change Wifi AP ssid and password
• Add Home Assistant update entity by @Domochip in #55
• Fix Home Assistant Update problem with release_date
• Fix parsing of latest Github release when it is quite big

Full Changelog: 3.1.10...3.2.2

What release file should I use

For module in version 3.1.x and lower: use WirelessPalaControl.x.bin file
For the others, you can use both files or go to the firmware page for Online Update ;-)

3.1.10 Various Optimizations

WPalaControl Version: 3.1.10

What's Changed

• Update Base to 2.3.7: EventSource code has been moved to a class
• Adapt code for Base 2.3.7 by @Domochip in #52
• Reduce Home Assistant Discovery Prefix length from 64 to 32 chars
• Reduce MQTT username length from 128 to 32 chars
• Reduce MQTT password length from 150 to 64 chars

Full Changelog: 3.1.8...3.1.10

3.1.8 Simplify version number + Many minor optimizations

WPalaControl Version: 3.1.8

What's Changed

• Define the ArduinoJson lib minimum version (#48)
• use the new ArduinoJson shrinkToFit function to optimize memory before serializing json
• Simplify Version Number (Base version is removed)
• WPalaControl Home Assistant Connectivity entity is now published even if there is no Stove connected
• GHAction adjusted for the new simplified versioning
• parseConfigWebRequest functions removed, parseConfigJSON function is used for Webpage form content too
• Improve EventSource management in status webpage
• Reorder PalaCommand in alphabetical order
• Add EXT ADRD pala command
• Palazzetti lib updated to 2.7.4

Full Changelog: v2.3.1-3.1.5...3.1.8

v2.3.1-3.1.5 HAss fixes and improvements

Base Version: 2.3.1
WPalaControl Version: 3.1.5

What's Changed

• Add Wifi signal quality in select on configw page by @Flobul in #28
• Wifi networks are also colored in the dropdown list
• Fix Fan availability in Home Assistant when only one additional fan is installed on the stove (@ec0li82 in #47)
• Fix bad topic for SetPoint in Home Assistant (@ec0li82 in #47)
• Improved the feedback after SET commands. New value appears immediately after execution of the command
• After a request to the stove to Power Off while burning, stove switch to status 10 (Fire Stop). In HomeAssistant, this status is now considered as Stove Off.
• Extended usage of ArduinoJson instead of manually building some JSON
• WBase wifi config is pushed from the web and handled differently (Post a json instead of a multipart form data)
• Configuration data is now pushed the same way as WBase wifi config (this allows to use the same code to parse config from savefile and from webpage form)

Full Changelog: v2.2.2-3.1.4...v2.3.1-3.1.5

v2.2.2-3.1.4 Fix no HA autodiscovery for JOTUL stove

Base Version: 2.2.2
WPalaControl Version: 3.1.4

What's Changed

• Fix: Home-Assistant autodiscovery not sent if SerialNumber is incorrect (solve problem for JOTUL stoves)
• Add GitHub auto compilation&release by @Flobul in #27

Full Changelog: v2.2.2-3.1.3...v2.2.2-3.1.4