the Device hardware version Info in bin file is Incorrect for tplink_cpe210-v1

[aparcar]

When I try to update the firmware to openwrt-21.02.1 in the TP-Link pharos UI, occurred the error "The hardware version is not supported."

I checked the Device hardware version and bin file.
They are match.

Device hardware version: tplink cpe210 v1
ImageFile: openwrt-21.02.1-ath79-generic-tplink_cpe210-v1-squashfs-factory.bin

But when I open the bin file with Editor to check the hardware version of the bin file, I found the string:
"CPE__510__(TP-LINK|UN|N300-5):1.0\r\n" in the header of the file
but not "CPE__210__(TP-LINK|UN|N300-5):1.0\r\n"

So I think that the Device hardware version Info in bin file is not match for tplink_cpe210-v1.
Could you please check it?
Thank you very much!

Firmware OpenWrt Install URL: https://downloads.openwrt.org/releases/21.02.1/targets/ath79/generic/openwrt-21.02.1-ath79-generic-tplink_cpe210-v1-squashfs-factory.bin
Firmware OpenWrt snapshot Install URL: https://downloads.openwrt.org/snapshots/targets/ath79/generic/openwrt-ath79-generic-tplink_cpe210-v1-squashfs-factory.bin